걸쇠는 건설 작업을 들어 올리는 데 없어서는 안될 리깅 액세서리입니다. 걸쇠는 리프팅 풀리와 고정 슬링을 연결하는 데 사용할 수 있습니다. 널리 사용되는 가볍고 유연한 연결 도구입니다.족쇄외형 특성에 따라 활 족쇄와 U 자형 족쇄로 나눌 수 있습니다. 목적에 따라 체인 걸쇠, 앵커 걸쇠 및 부동 걸쇠가 있습니다.
(1) 체인걸쇠 is a 걸쇠 used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the 걸쇠, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust.
(2) 앵커 걸쇠 is the 걸쇠 used to connect the anchor chain and the sinker, and the method of use is the same as the chain 걸쇠.
(3) The floating 걸쇠 is the 걸쇠 used to connect the floating body and the anchor chain, and the method of use is the same as the chain 걸쇠.
